This past weekend I raced the opening day of the outdoor track at Barnstormer’s RC in Chester, NY. The track is a medium grip large layout 120′ x 220′. After a major rain storm the track broke up a bit and had loose dirt through out the surface. I ran M4 BowFighters on my Pro-Line PRO-2 […]
You're browsing archive for:Jim Hustins
Podium pic from Saturday’s Cruzin’ w/RC Race. Pro-Line driver Jim Hustins used his PRO-2 chassis, M4 BowFighters, Evo body, Pro-Spec shocks, and MIP Ball diff. “I took 1st and fellow Pro-Line driver Paul Medina took 2nd also running M4 BowFighters.” – Jim Hustins
Had a great time racing at Cruzin w/RC’s season opener in Waldwick, NJ this past Saturday. I finished 1st in 2wd Mod SC with my Pro-Line PRO-2 running M4 BowFighters and an EVO body. I also took 2nd in 4wd buggy running Caliber m3 front/ m4 rear and a Phantom body, and 3rd in 17.5 buggy running […]
Looking for a trick way to mount your buggy wing? Try using Pro-Line Racing Secure-Loc cap kit. I trimmed the body clip mounts off, drilled a hole in the center where the factory mount was and installed the set screws. It holds the wing tight and will look good too. Check out this step by […]
Pro-Line driver Jim Hustins finished 2nd in 17.5 SC at Motorama using MC IONs behind fellow teammate James Raschko. “MC IONs were dialed all weekend.” – Jim Hustins I also won the B-main and finished 10th with my Pro-Line PRO-2 SC truck in 2wd Modified SC using MC IONs also. –Jim Hustins
Cutting Holes in a Pro-Line Flo-Tek Body with a Dremel by Team Driver Jim Hustins The Flo-Tek body was the first SC body specifically designed to minimize the short-course body parachute effect! If you have ever raced or bashed a short-course truck, you know that SC bodies act like parachutes when going over jumps, causing you […]
