After receiving the Pro-Spec Shocks for my Pro-Line PRO-2 SCT, I was anxious to try them out. I built them, mounted them up, and I was blown away by how SMOOTH these shocks are. I have built a LOT of shocks in my decades of RC racing, and these shocks are some of the absolute best. They look amazing too! As in show stoppers. It’s hard not to just gawk at the truck with those fat shock bodies glistening in the sun.
The shocks are easy to build and change, and did I mention they are SMOOOOOOTH? Like Butta!!!
After a full day of racing I have not seen any leaks or any squeeks. They just WORK!
Thank you Pro-Line for coming out with a fantastic item! These shocks are every bit as good as your Tires and Bodies and now you can get them for Buggies too!!??!
Here is the Setup I use on my PRO-2 SCT:
Front Shocks:
1.6x 2 hole piston -40wt oil, Pro-Line Purple Spring 4.0 in/lb ( 6308-15). I use -2 droop @ bottom of axle( using an Integy 40mm droop gauge ) with 31mm ride height ( up a tad more if its bumpy, down a tad if its high bite )
Rear Shocks:
1.6x 2 hole piston – 32.5wt oil, Pro-Line Green Spring 2.2 in/lb ( 6308-17). I use -2 droop @ bottom of axle( using Integy 40mm droop gauge ) with 29mm ride height ( up a tad more if it’s a bumpy, and down a tad if its high bite )
Give this setup a shot on your Traxxas Slash/Rustler/ Pro-Line PRO-MT, PRO-2 SC Buggy/ or any SCT. You may find it a good starting point.
