Hole Shot Newsletter | December 2023

Check out this latest issue of the Pro-Line Hole Shot Newsletter – December 2023!

This month has something for everyone from a new Paddle tire for PROMOTO to Dirt Oval tires to Large Scale Tires and an innovative Crawler Bumper Set!!

Hot Lap 2.2″ Dirt Oval Buggy Front & Rear Tires

Introducing the next generation of sprint car dirt oval tires from Pro-Line, the Hot Lap! This tire was designed from the ground up for all-out performance, consistency, and long-lasting tire wear.

The Hot Lap features a deep, geometric grooved tread that provides increased forward bite, a predictable, smooth steering feel, and great tread cleanout. It’s available in either MC (Clay) or M4 (Super Soft) compounds to suit your track’s specific needs, and like every other tire that Pro-Line makes is proudly Made in the USA!

Pair with the Showtime Sprint Car Wheels, Front Wheels (PRO278203) & Rear (PRO278303), for the ultimate upgrade in style and performance for your sprint car!

Hot Lap 2.2″ Dirt Oval Buggy 2WD Front Tires
PRO830903 M4 (Super Soft)
PRO830917 MC (Clay)

Hot Lap 2.2″ Dirt Oval Buggy 2WD Rear Tires
PRO830803 M4 (Super Soft)
PRO830817 MC (Clay)

Time to hit the dunes or shred some powder! The Roost MX rear paddle tire from Pro-Line is designed to turn your Losi® PROMOTO-MX into a sand or snow-flinging machine.

The Roost MX does exactly what its name states it makes massive roosts in sand or snow! It features 9 large cup-shaped scoop paddles allowing you to power out of deep sand and get up on the plane with ease. The stiff, durable compound keeps the paddles true and wear to a minimum.

A few tips for driving your Roost MX-equipped PROMOTO-MX in the dunes:

For the ultimate handling on sand, remove the side lean bars/wheels to keep the bike from digging in when leaning/steering.
Keep your speed up as much as possible to keep the bike floating across the sand!
Brush/shake out your chain after every battery pack to remove as much sand as possible
A knobby front tire is the best performing front tire as well as being the most scale

The Roost MX comes conveniently pre-glued to a black Supermoto wheel, which is smaller in diameter than the stock wheels. This allows for the largest possible paddle and gives your bike that true-to-scale look. Inside the tires are high-quality closed cell inserts for consistent handling and durability. This tire is proudly manufactured and assembled at Pro-Line Headquarters in the USA!

Roost MX Sand/Snow Paddle Motorcycle Tire Mounted on Black Supermoto Wheel
for PROMOTO-MX Rear
PRO1023810

——————–

Pro-Line is proud to announce our first licensed 2.9″ tire from Mickey Thompson Tires, the Baja Pro™ X! The Baja Pro™ X is a competition-proven extreme terrain tire perfect for your Axial® SCX6™.

Coming in at a massive 7.85″ tall x 3″ wide, this is the most extreme SCX6™ tire from Pro-Line yet! Molded in our legendary G8 compound, all the details of this gnarly tire are captured in perfect 1/6 scale detail: from the Tread Biter™ cleats for added traction to the Mud Scoops for added cleaning power, to the Massive Sidebiters® and angled shoulder scallops for ultimate side grip. Symmetric directional tread pattern provides excellent traction and cleaning power as well.

Important note: To capture this tire in the best scale proportions possible, the Baja Pro X is wider than a traditional SCX6™ tire. This requires at least +2mm of offset (wheel or hex) to avoid rubbing on your SCX6™ links or springs. Pro-Line’s Method 305 NV Wheel Faces (PRO281400) are a great option!

Mickey Thompson Baja Pro X 2.9″ G8 Rock Terrain Truck Tires
for Axial® SCX6™ Front or Rear
PRO1023214

——————–

Pro-Line is proud to introduce a new upgrade bumper designed to extract the maximum possible performance from your Axial® SCX10™ III! This new bumper set is for rock crawlers who value simplicity and functionality.

This bumper set was designed from the ground up to achieve the best ground clearance, tire clearance, and approach angle possible while maintaining a Scale Appearance. The bumper is moved up and back into the chassis, making it a perfect fit with our high-performance bodies such as the Cliffhanger (PRO356600, PRO361500 Cab-Only) and Coyote (PRO361700). The front bumper mount features tabs for our 2″ Ultra-Slim lightbar (PRO635200) with cable hooks to keep the wires out of the way, or you can mount two D-Rings for scale recovery (not included). A built-in winch cable slot acts as a fairlead for your recovery winch (not included).

The new rear bumper adds versatility to your rig, with 3 different looks to suit your build:

Use the included plugs in the rear for a minimalist bumper that has a smooth, finished look with a maximum departure angle
Flip the plugs around to utilize the D-Rings hook mounts (hooks not included)
Use the through holes to turn it into a bumper mount for the stock Axial® bumper, allowing you to bring the bumper closer to the frame rails. This adjustability allows the stock bumper to fit a wider range of bodies and increases the departure angle.

The bumper set is a direct fit on your SCX10™ III and is Made in the USA from sleek matte black nylon. Don’t get hung up on the rocks, get your new High-Performance bumper set today!

High-Performance Crawler Bumper Set (Front & Rear)
for SCX10™ III
PRO640400

——————–

Just like the larger Coyote for 12.3″ Crawlers, this mini-Coyote features a pinched front end and a dove-tailed rear end for maximum tire clearance while still maintaining a true-to-scale, Late-80s domestic-style appearance. The wheel openings have clearance for our largest SCX24™ tires with no trimming needed, while the short overhangs provide a best-in-class approach and departure angle.

The Coyote is made from a single piece of crystal-clear polycarbonate to save on weight and has a molded-in drop-down bed to make room for you to add your favorite scale accessories. Everything on the Coyote body has been optimized for maximum crawling performance for your SCX24™. Don’t get stuck on the rocks, get your very own Coyote body today!

Coyote High Performance Clear Body
for SCX24™
PRO363200

——————–

NOW WITH REMOVABLE HEX WHEELS!

The Dumont Paddle tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter.

The Dumont Paddle tires are mounted to the Raid 2.4″/3.25″ Wheel, featuring a removable hex for ultimate versatility. Not only do the included 17mm hexes give you the option between the MOJAVE™ 6S and Unlimited Desert Racer® axles and offsets, but they also allow you to easily replace a damaged wheel hex without needing to replace your glued tires. The hefty 6×30 interlocking hex design is secured to the wheel by 6 M3 screws that are spaced 30mm across. Replacement Hexes are available separately (PRO639000), while our full line of 6×30 hexes will also fit whatever custom build or fitment you can dream up.

Dumont Sand/Snow Tires Mounted on Raid Black 6×30 Removable 17mm Hex Wheels
for Mojave™ 6S and UDR® Front or Rear
PRO1018911

Unlimited Desert Racer® is a registered trademark of Traxxas® L.P.

The Menace HP tires are BELTED to handle extreme power and high speeds with ease. No tire ballooning here! Transform the handling of your truck with the low-profile carcass, deep grooves, and long-lasting compound, also great for speed runs! These tires and Raid 5.7″ wheels have been developed from the ground up to be lightweight and durable enough to handle extreme X-MAXX® and KRATON™ 8S punishment to give you the best all-around bashing experience possible.

The Raid 5.7″ Black Wheel now features a removable hex for ultimate versatility! Not only do the included hexes allow you to choose between the KRATON™ 8S and X-MAXX® axle sizes, but they also allow you to easily replace a damaged wheel hex without needing to replace your glued tires and eliminate the need for other adapters or wheel modification. The hefty 8×48 interlocking hex design is secured to the wheel by 8 M3 screws that are spaced 48mm across. Replacement Hexes are available separately (PRO638300).