1:10 Buggy Pro-Spec Shock Kits
for 1:10 Buggy#6267-00 FRONT
#6267-01 REAR
This is a Pro-Spec Shock Kit for 1:10 buggy Front. The next generation of Pro-Line Shock Technology has arrived: Pro-Line Pro-Spec Shocks for 1:10 Buggies! Every last detail has been refined to give you the best performing and best looking Shocks ever made. The Pro-Spec Shocks are a 12mm Big Bore design with a Single Low Friction X-Ring Seal. The Pistons and Shaft Guides are made from Silky Smooth White Delrin for Low Stiction and the 3.5mm thick Shock Shaft is Hard Chrome Coated, just like full scale racing shocks.
The Pro-Spec Shocks feature an easy access Bleeder Cap Screw for consistent shock builds every time. Each pair of Pro-Spec Shocks includes 3 different piston options (1.4, 1.6 & 1.8) and a blank piston for drilling to a custom size. Custom Shock Tightening Tools and optional shock limiters are also included. Pro-Line’s new Pro-Spec Shocks come in kit form with build instructions, so you can build the shocks exactly how you want. Your current 12mm big bore buggy springs bolt right up so you can get exactly the spring rate you are used to. Upper and lower shock pivot balls are included so you can fit a wider range of vehicles right out of the box. Optional +2, +4 and +6mm spring perches are included to fit a wide variety of buggies and shock springs.
Experience the Performance of Pro-Line’s Next Generation Shock Technology for yourself – Get Pro-Spec Shocks!
Additional Pro-Spec Shock Items Released:
1:10 Buggy Pro-Spec Front Shock Shaft Set #6267-02
1:10 Buggy Pro-Spec Rear Shock Shaft Set #6267-04
1:10 Buggy Pro-Spec Front Shock Body Set #6267-03
1:10 Buggy Pro-Spec Rear Shock Body Set #6267-05
Optional Spring Retainer Pack for 1:10 AND Short Course Pro-Spec Shocks #6267-06
_________________________________________________________________________________
Suppressor
Off-Road 1:8 Buggy Tires Front or Rear
X3 (Soft) #9054-003
X4 (Super Soft) #9054-004
M3 (Soft) #9054-02
M4 (Super Soft) #9054-03
This is a Suppressor 1:8 Buggy Race Tire. The Suppressor is Pro-Line’s latest race tire designed specifically for medium packed to loose outdoor tracks. The tread design takes inspiration from Pro-Line’s incredibly successful line of race tires like the Hole Shot, Lock Down and Tazer but brings a whole new level of performance! The Suppressor features a smooth transition from the sidewall to the tread to prevent catching the sharp edges in the track, which can cause violent roll overs and lost time. The long center bars on the Suppressor provide massive forward bite and have a Hole Shot style relief cut for added side to side tread flex. Below the center tread is reinforcement webbing that mimics the outside pattern for a cohesive Suppressor look.
Don’t get left behind with old tire technology, jump into the future with the all new Pro-Line Suppressor!
_________________________________________________________________________________
Suppressor VTR 4.0″
for Off-Road 1:8 Truck Tires Front or Rear
X3 (Soft) #9055-003
M3 (Soft) #9055-02
This is a Suppressor 1:8 Truggy Race Tire. The Suppressor is Pro-Line’s latest race tire designed specifically for medium packed to loose outdoor tracks. The tread design takes inspiration from Pro-Line’s incredibly successful line of race tires like the Hole Shot, Lock Down and Tazer but brings a whole new level of performance! The Suppressor features a smooth transition from the sidewall to the tread to prevent catching the sharp edges in the track, which can cause violent roll overs and lost time. The long center bars on the Suppressor provide massive forward bite and have a Hole Shot style relief cut for added side to side tread flex. Below the center tread is reinforcement webbing that mimics the outside pattern for a cohesive Suppressor look.
Don’t get left behind with old tire technology, jump into the future with the all new Pro-Line Suppressor!
_________________________________________________________________________________
Enforcer
Clear Body for Tekno NT48
#3451-00
This is a Pro-Line Enforcer Clear Body for Tekno NT48. Attention All Tekno Fans! Pro-Line has a brand new aftermarket Truggy body that is way more durable and better looking than stock: The Enforcer! From the mind of Ty Tessmann and inspired from the success of the Type-Rbuggy body, the Enforcer has a meaner and more angular front end look with swooping roof and bed sections for improved airflow and high-speed stability. The hood of the body is steeper to create more down force over the front wheels for more steering and faster lap times. Bring your truck up to speed with Pro-Line’s new Enforcer body! This is a must have item for the new racing season!
Don’t forget to submit your finished Pro-Line body to Reader’s Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!
_________________________________________________________________________________
Extended Front and Rear Body Mounts
for Tekno SCT410
#6272-00
This is an Extend Body Mount Kit for Tekno SCT410. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit for the Tekno SCT410 includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!
